E-Mon D-Mon E20-208200-J-D-KIT KWH/KW Demand Submeter, Class 2000, Three-Phase TYPE, 208 V, Current Sensor Rating: 200 AMP, 50 - 60 HZ, 3 PH, Accuracy: +/- 0.2 PCT From 1 - 100 PCT Of Rated Load (Certified To ANSI C12.20), Input Power: 6 VA, Power Factor: 0.5 Leading Or Lagging, 4-Wire (Wye) Wiring Configuration, Direct-Read 8-Digit LCD Display, Enclosure: NEMA 12 Industrial Grade JIC Steel Enclosure With Padlocking Hasp And Mounting Flanges (6-3/4 IN Height X 5-3/16 IN Width X 3-1/4 IN Depth) For Indoor Installations With 1-1/16 IN Knockout (3/4 IN Conduit) On Bottom Of Enclosure And 7/8 IN (1/2 IN Conduit) On Top Of Enclosure, Temperature Rating: -20 To 50 DEG C, Relative Humidity Range: 0 - 95 PCT Non-Condensing, Altitude: 2000 MR Maximum, Pollution Degree: 2 In Accordance With IEC 664, Cable: 300 VAC 6 Stranded Conductor 22 - 26 AWG UL-Listed Telephone Cord, Cable Connector: RJ-45 Male IDC, Input/Output Voltage: +5 VDC/18 VAC, Circuit Input Isolation 5.3 KVAC For 1 MINT, Baud Rate: 9600, RS-485 Serial Communications, Littlefuse KLDR.100 100 MILAMP 600 VAC Time-Delay Cartridge Fuse, Battery Cell: Eagle-Picher LTC-3PN-S2 3.5 VDC 350 MILAMP-HR Lithium Thionyl Nitrate Non-Rechargeable Cell Used For Memory Retention, Cable: 4-Conductor UL-Listed Telephone Cord, Input/Output Voltage: Ground-Isolated +/-5.4 VDC, Cable Connector: RF-45 Male IDC Or Screw Terminal Termination, Circuit Input Isolation: 5.3 KVAC, Circuit Output Isolation: 21.5 KVAC, Output Voltage Potential: 0 - 5 VDC Logic Levels, Mating Plug Connector: Weidmuller PN: 152876, Signal Isolation Voltage: 5.3 KVAC For 1 MINT, UL/CUL Listed, Certified By Independent Test Lab To ANSI C12.20 National Accuracy Standards, New York City Approved, Con Edison Approved For RSP Program Standard, For Tenant Billing, Cost Allocation, Green Building Programs And Load Profiling In Skyscrapers, Shopping Centers, Airports, Factories, Office Buildings, Apartment Complexes, Industrial, Governmental And Educational Facilities Application